RVA Diagnostics
Diagnostic Information for the RVA brand products
Jack(s) retract partially
The most common reason a jack will retract partially and stop, is the jack piston is bent. The bend can be hard to se...
Jack(s) retract slowly
RVA Jacks are single acting hydraulic cylinders. This means they are only under hydraulic pressure when extending the...
- Updated
Jacks settles on one or more corners after leveling
After leveling, the coach settles on one or more jacks. This can begin almost immediately or occur over a period of t...
- Updated
Pump motor runs, Jack(s) Do Not Extend
When the pump motor runs but one or more of the jacks do not extend complete the following steps. Check for power a...
- Updated
RVA Leveling System Turns On, None Of The Jacks Deploy, Pump Does Not Run
Locate the controller and solenoid control wire - Remove the button panel and follow the harness until you locate th...
- Updated